100 Click this button to install |1 software to the specified destination directory.
101 Click this button to install |1 software to your computer.
200 Welcome to the |1 installation program.
300 Please enter the drive or path containing the |1 source files.
301 Enter or select a destination directory.
302 The destination directory:
303 does not exist. Do you want the directory to be created?
304 Change Directory
305 Install From
400 An error occurred while calculating required disk space.
401 Cannot read drive
402 Please verify the drive door is closed and that the disk is formatted and free of errors.
403 Could not open the file named:
404 Could not read from the file named:
405 Could not write to the file named:
406 Please verify that the destination drive has enough disk space.
407 Could not create directory:
411 Are you sure you want to Exit?
412 |1 Setup was interrupted before your new software was fully installed.
413 You can run |1 Setup in its entirety at a later time to complete the installation.
414 Setup is not yet complete.
415 If you quit now, this product will not be correctly installed.
416 Quit the setup of this product?
417 |1 Setup was completed successfully.
418 |1 Setup was not completed successfully.
419 Error determining allocation unit for drive
420 is in the Setup source files directory. Please type a different directory.
421 Could not create the file named:
422 Please verify that destination drive is not write protected.
423 Please insert the disk labeled:
424 'Disk
425 ' into drive
426 Section:
427 Invalid line in setup information file!
428 The specified directory:
429 is invalid, incomplete, or write protected. Please type a full path with drive letter; for example 'C:\APPS'.
430 The directory doesn't exist!
431 Invalid Directory Name
432 The destination file is write protected.
433 The destination file in in-use. Please ensure that all other applications are closed.
434 Out of space on destination drive
435 An access violation occurred while copying the file.
436 A sharing violation occurred while copying the file.
437 Out of memory trying to copy the file.
438 Cannot create temporary file.
439 Cannot delete existing destination file.
440 Cannot rename temporary file.
441 Cannot read source file.
442 Cannot read destination file attributes.
443 Internal copy error.
444 The file could not be installed.
445 Please check the connection to drive
446 If you ignore a copy error, the file will not be copied. The application may not function properly as a result. Do you want to ignore the error?
447 The drive specified by the 'TMP' or 'TEMP' environment variable is not ready.
448 The line 'device=vshare.386' may need to be added to the [386Enh] section of your SYSTEM.INI file to ensure proper operation of your new software.
449 Cannot read network path '|1'.
450 Please verify that this path is correct and that you have permission to access it.
451 Application removal logfile '|1' not found. Unable to continue.
452 Invalid command-line parameters. Unable to continue.
453 Application removal executable '|1' not found. Unable to continue.
454 Remove |1
455 Error registering the application removal executable with Windows
456 Error creating a Program Manager icon for the application removal utility
457 Setup is about to replace a pre-existing file(s). This may cause loss of data for an existing application.
458 Installing over an existing installation without first removing it may damage that installation or cause future attempts to remove the installation to fail.
459 Cancel setup?
460 Please run setup again and select a new location for application files
461 Are you sure you want to continue?
462 An error occurred trying to update the Windows registration database.
463 Microsoft Shared\
465 An error occurred trying to create the program group '|1'
466 An error occurred trying to create a program icon for '|1'
467 An error occurred trying to copy '|1' to the application directory
468 The file '|1' could not be registered because it was not found.
469 Windows was unable to run the program '|1'. Your system may be low on memory, or the program may not have been found.
470 Error: 'SETUP.LST' contains no information on how to register the remote component '|1'. This information should have been found in a '|2' key in SETUP.LST
471 Program Manager
472 Unexpected error creating '|1':
500 Setup was unable to determine a valid default destination directory. You will need to specify a destination directory.
501 Setup is checking for necessary disk space...
502 Setup is creating program icons...
503 Setup is updating your system...
504 The name of the application's executable file could not be determined.
505 |1 Setup
506 The SETUP.LST file is corrupt or could not be found.
507 An unexpected setup error has occurred!
508 Setup customization error: An icon needs to be created for |1, but no folder or Program Manager group was created for this purpose.
509 Setup error: Missing 'CommitAction()' or 'AbortAction()'.
510 Remote Automation Management
511 Automation Manager
512 RemAuto Connection Manager
600 Error determining disk space free for drive
701 Directory:
702 &Change Directory
703 E&xit Setup
704 Begin the installation by clicking the button below.
705 Cancel
706 Destination File:
707 &Install Now
708 &Change Drive
709 Drive
710 Space Available
711 Space Needed
712 Space Required
713 There is not enough free disk space on one or more drives.
714 OK
715 Dri&ves:
716 &Directories:
717 &Path:
718 Setup cannot install system files or update shared files if they are in use. Before proceeding, we recommend that you close any applications you may be running.
900 Network &Address
901 Network &Protocol
902 &Continue
903 E&xit Setup
904 Remote OLE Server Configuration
905 Please fill in the requested configuration information about the following remote server:
906 The protocol sequence |1 (|2) is not supported or available on this machine
907 The protocol sequence '|1' ('|2') is invalid
908 An unexpected error occurred while determining the protocol sequences available on this machine
909 Setup error: An error occurred trying to read protocols from the SETUP.LST file.
910 None of the protocols needed by this application appear to be available or installed on this machine.
911 In order to run Setup successfully, you will need to first install one of the following network protocol sequences:
912 This application will not be able to access the remote component '|1' until the protocol '|2' is installed.
2000 File currently on disk was already up to date
2001 File was not found or was an older version -- new file copied
2002 ERROR:
2003 WARNING:
2004 DURING THIS ACTION:
2005 Error writing to logfile '|1'
2006 Setup fatal error: Unable to generate installation log file.
2007 PLEASE DO NOT MODIFY OR DELETE THIS FILE!
2008 This file contains information about the installation of an application.
2009 It will be used to automatically remove all application components from your computer if you choose to do so.
2010 There was an unexpected problem trying to create or write to the logfile '|1'. Error number is |2.
2011 Out of memory trying to create or write to the logfile '|1'
2012 User Responded with '|1'
2013 Error attempting to run the application removal program to remove temporary installation files.
2014 Setup will now start the application removal utility to remove temporary installation files.
2100 OK
2101 Cancel
2102 Abort
2103 Retry
2104 Ignore
2105 Yes
2106 No
2107 (Unknown)
2200 An error occurred while registering the file '|1'
2201 Unexpected error while registering file '|1'
2202 Could not initialize OLE in order to register file '|1'
2203 LoadLibrary() failed while registering file '|1'
2204 No entrypoint for DllRegisterServer() was found in '|1'
2205 DllRegisterServer() in the file '|1' returned failure
2206 One possible cause for this error is that RPC may not be installed on your computer.
2207 If this is the problem, then you will need to exit Setup, install RPC, and restart Setup.
2208 The file '|1' was not copied because it is intended for use under Windows NT only. It is not needed under Windows 95.
10001 Message d'installation
10100 Cliquer sur ce bouton pour installer le logiciel |1 dans le rΘpertoire de destination spΘcifiΘ.
10101 Cliquer sur ce bouton pour installer le logiciel |1 sur votre ordinateur.
10200 Bienvenue dans le programme d'installation |1.
10300 Veuillez entrer le lecteur ou le chemin d'accΦs contenant les fichiers source |1.
10301 Entrez ou sΘlectionnez un rΘpertoire de destination.
10302 Le rΘpertoire de destination:
10303 n'existe pas. Voulez-vous crΘer le rΘpertoire ?
10304 Changer le rΘpertoire
10305 Installer α partir de
10400 Une erreur s'est produite lors du calcul de l'espace requis.
10401 Impossible de lire sur le lecteur
10402 Veuillez vΘrifier que le volet du lecteur est fermΘ et que la disquette est formatΘe et en bon Θtat.
10403 Impossible d'ouvrir le fichier nommΘ:
10404 Impossible de lire dans le fichier nommΘ:
10405 Impossible d'Θcrire dans le fichier nommΘ:
10406 Veuillez vΘrifier que le lecteur de destination possΦde suffisamment d'espace disque.
10407 Impossible de crΘer le rΘpertoire:
10411 Etes-vous s√r de vouloir quitter ?
10412 Le programme d'installation |1 a ΘtΘ interrompu avant que le nouveau logiciel soit entiΦrement installΘ.
10413 Vous pouvez exΘcuter le programme d'installation |1 entiΦrement plus tard pour finir l'installation.
10414 L'installation n'est pas encore terminΘe.
10415 Si vous abandonnez maintenant, ce produit ne sera pas correctement installΘ.
10416 Abandonner l'installation de ce produit ?
10417 Le programme d'installation |1 a ΘtΘ complΘtΘ avec succΦs.
10418 Le programme d'installation |1 n'a pas ΘtΘ complΘtΘ avec succΦs.
10419 Erreur lors de la dΘtermination de l'unitΘ d'allocation du lecteur
10420 est le rΘpertoire des fichiers source du programme d'installation. Veuillez entrer un rΘpertoire diffΘrent.
10421 Impossible de crΘer le fichier nommΘ:
10422 Veuillez vΘrifier que le lecteur de destination n'est pas protΘgΘ en Θcriture.
10423 Veuillez insΘrer la disquette intitulΘe:
10424 'Disquette
10425 ' dans le lecteur
10426 Section:
10427 Ligne incorrecte dans le fichier d'informations d'installation.
10428 Le rΘpertoire spΘcifiΘ:
10429 est incorrect, incomplet ou protΘgΘ en Θcriture. Veuillez entrer le chemin d'accΦs complet comprenant la lettre du lecteur; par exemple 'C:\APPS'.
10430 Ce rΘpertoire n'existe pas.
10431 Nom de rΘpertoire incorrect
10432 Le fichier de destination est protΘgΘ en Θcriture.
10433 Le fichier de destination est en cours d'utilisation. Veuillez vous assurer que toutes les autres applications sont fermΘes.
10434 Espace ΘpuisΘ sur le lecteur de destination
10435 Une violation d'accΦs s'est produite lors de la copie du fichier.
10436 Une violation de partage s'est produite lors de la copie du fichier.
10437 MΘmoire ΘpuisΘe lors de la copie du fichier
10438 Impossible de crΘer le fichier temporaire.
10439 Impossible de supprimer le fichier de destination
10440 Impossible de renommer le fichier temporaire
10441 Impossible de lire le fichier source
10442 Impossible de lire les attributs du fichier de destination
10443 Erreur de copie interne
10444 Impossible d'installer le fichier
10445 Veuillez vΘrifier la connexion au lecteur
10446 Si vous ignorez une erreur de copie, le fichier ne sera pas copiΘ. En consΘquence, il se peut que l'application ne fonctionne pas correctement. Voulez-vous ignorer l'erreur ?
10447 Le lecteur spΘcifiΘ par la variable d'environnement 'TMP' ou 'TEMP' n'est pas prΩte.
10448 Il se peut que vous deviez ajouter la ligne 'device=vshare.386' α la section [386Enh] de votre fichier SYSTEM.INI pour vous assurer d'un fonctionnement adΘquat de votre nouveau logiciel.
10449 Impossible de lire le chemin d'accΦs rΘseau '|1'.
10450 Veuillez vΘrifier que ce chemin d'accΦs est correct et que vous avez la permission de l'accΘder.
10451 Le fichier journal de dΘsinstallation '|1' est introuvable. Impossible de continuer.
10452 ParamΦtres de la ligne de commande incorrects. Impossible de continuer.
10453 Le fichier exΘcutable de retrait d'application '|1' est introuvable. Impossible de continuer.
10454 Retire |1
10455 Erreur lors de l'ajout au registre systΦme de Windows de l'exΘcutable de de retrait d'application
10456 Erreur lors de la crΘation de l'ic⌠ne pour l'exΘcutable de retrait d'application dans le Gestionnaire de programmes.
10457 Le programme d'installation se prΘpare α remplacer un ou plusieurs fichiers dΘjα en place. Ceci peut entraεner des pertes de donnΘes pour des applications dΘjα installΘes.
10458 Installer sur une installation prΘcΘdente sans d'abord la retirer peut soit endommager cette installation ou soit entraεner l'Θchec des tentatives futures de retrait d'installation.
10459 Annuler l'installation ?
10460 Veuillez exΘcuter le programme d'installation α nouveau et sΘlectionner un nouvel emplacement pour les fichiers de l'application.
10461 Etes-vous s√r de vouloir continuer ?
10462 Une erreur s'est produite lors de la mise α jour de la base de donnΘes du registre systΦme de Windows.
10463 Microsoft Shared\
10465 Une erreur s'est produite en essayant de crΘer le groupe de programmes '|1'
10466 Une erreur s'est produite en essayant de crΘer l'ic⌠ne du programme pour '|1'
10467 Une erreur s'est produite en essayant de copier '|1' dans le rΘpertoire de l'application
10468 Le fichier '|1' ne peut pas Ωtre inscrit car il n'a pas ΘtΘ trouvΘ.
10469 Windows ne peut pas exΘcuter le programme '|1'. Votre systΦme doit avoir peut de mΘmoire disponible ou le programme n'a peut Ωtre pas ΘtΘ trouvΘ.
10470 Erreur: 'SETUP.LST' ne contient aucune information sur comment inscrire le composant '|1' α distance. Cette information devrait Ωtre trouvΘe dans une entrΘe '|2' dans SETUP.LST
10471 Gestionnaire de programmes
10472 Erreur inattendue a la crΘation de '|1':
10500 Le programme d'installation ne peut pas dΘterminer un rΘpertoire de destination par dΘfaut qui soit valide. Vous devez spΘcifier un rΘpertoire de destination.
10501 Le programme d'installation vΘrifie l'espace disponible sur le disque...
10502 L'installateur crΘe des ic⌠nes du programme...
10503 Le programme d'installation est en train de mettre α jour votre systΦme...
10504 Le nom du fichier exΘcutable de votre application n'a pas pu Ωtre dΘterminΘ.
10505 Programme d'installation |1
10506 Le fichier SETUP.LST est endommagΘ ou introuvable.
10507 Une erreur d'installation inattendue s'est produite.
10508 Erreur de personnalisation de l'installation: une ic⌠ne doit Ωtre crΘΘe pour |1, mais aucun dossier ou groupe du Gestionnaire de programmes n'a ΘtΘ crΘΘ α cet effet.
10509 Erreur de l'installation: Il manque 'CommitAction()' ou 'AbortAction()'.
10510 Gestionnaire d'automation α distance
10511 Gestionnaire d'automation
10512 Gestionnaire de connexion
10600 Erreur lors de la vΘrification de l'espace disque libre pour le lecteur
10701 RΘpertoire:
10702 &Changer le rΘpertoire
10703 &Quitter l'installation
10704 DΘmarrez l'installation en cliquant sur le bouton ci-dessous.
10705 Annuler
10706 Fichier de destination:
10707 &Installer maintenant
10708 &Changer le lecteur
10709 Lecteur
10710 Espace disponible
10711 Espace nΘcessaire
10712 Espace requis
10713 Il n'y a pas suffisamment d'espace disque libre sur un ou plusieurs lecteurs.
10714 OK
10715 &Lecteurs:
10716 &RΘpertoires:
10717 &Chemin:
10718 Le programme d'installation ne peut pas installer des fichiers systΦme ou mettre α jour des fichiers partagΘs lorsque ceux-ci sont en cours d'utilisation. Avant de continuer, nous vous recommandons de fermer toutes les applications en cours d'exΘcution.
10900 &Adresse rΘseau
10901 &Protocole rΘseau
10902 &Continuer
10903 &Quitter l'installation
10904 Configuration du serveur OLE α distance
10905 Veuillez remplir les informations de configuration requises α propos du serveur α distance suivant:
10906 La sΘquence de protocole |1 (|2) est non supportΘe ou non disponible sur cette machine
10907 La sΘquence de protocole '|1' ('|2') est incorrecte
10908 Une erreur inattendue s'est produite pendant la dΘtermination des sΘquences de protocoles disponible sur cette machine
10909 Erreur d'installation: Une erreur s'est produite en essayant de lire les protocoles dans le fichier SETUP.LST.
10910 Aucun des protocoles nΘcessaires par cette application semble Ωtre disponible ou installΘ sur cette machine.
10911 Afin d'exΘcuter l'installation avec succΦs, vous avez besoins d'installer en premier l'une des sΘquences de protocole rΘseau suivantes:
10912 Cette application ne sera pas capable d'accΘder au composant '|1' α distance tant que le protocole '|2' n'est pas installΘ.
12000 Le fichier se trouvant sur le disque est dΘjα α jour.
12001 Fichier introuvable ou d'une version plus ancienne, le nouveau fichier a ΘtΘ copiΘ.
12002 ERREUR:
12003 AVERTISSEMENT:
12004 PENDANT CETTE L'ACTION:
12005 Erreur lors de l'Θcriture dans le fichier journal '|1'
12006 Erreur fatale d'installation : impossible de crΘer un fichier journal d'installation.
12007 PRIERE DE NE PAS MODIFIER OU SUPPRIMER CE FICHIER!
12008 Ce fichier contient des informations sur l'installation d'une application.
12009 Il sera utilisΘ pour retirer automatiquement tous les ΘlΘments d'une application de votre machine si vous en dΘcidez ainsi.
12010 ProblΦme inattendu lors de la tentative de crΘation ou d'Θcriture dans le fichier journal '|1'. Erreur numΘro |2.
12011 MΘmoire ΘpuisΘe lors de la tentative de crΘation ou d'Θcriture dans le fichier journal '|1'
12012 RΘponse de l'utilisateur avec '|1'
12013 Erreur lors de la tentative d'exΘcution du programme de retrait d'application visant α retirer les fichiers temporaires d'installation.
12014 Le programme d'installation dΘmarre maintenant l'utilitaire de retrait d'application pour supprimer les fichiers temporaires d'installation.
12100 OK
12101 Annuler
12102 Abandonner
12103 RΘessayer
12104 Ignorer
12105 Oui
12106 Non
12107 (Inconnu)
12200 Une erreur s'est produite pendant l'inscription du fichier '|1'
12201 Erreur inattendue pendant l'inscription du fichier '|1'
12202 Impossible d'initialiser OLE afin d'inscrire le fichier '|1'
12203 LoadLibrary() a ΘchouΘ pendant l'inscription du fichier '|1'
12204 Aucun point d'entrΘe pour DllRegisterServer() n'a ΘtΘ trouvΘ dans '|1'
12205 DllRegisterServer() dans le fichier '|1' retourne un Θchec
12206 Une cause possible pour cette erreur est que les RPC n'ont pas ΘtΘ installΘs sur votre ordinateur.
12207 Si c'est bien ce problΦme, alors vous devez sortir de l'installation, installer les RPC, et relancer l'installation.
12208 Le fichier '|1' n'a pas ΘtΘ copiΘ car il destinΘ a Ωtre utilisΘ avec Windows NT uniquement. Il n'est pas nΘcessaire avec Windows 95.
20001 Setup-Meldung
20100 WΣhlen Sie diese SchaltflΣche, um |1-Software in das angegebene Verzeichnis zu installieren
20101 WΣhlen Sie diese SchaltflΣche, um |1-Software auf Ihrem System zu installieren
20200 Willkommen zum |1-Installationsprogramm
20300 Bitte geben Sie den Pfad fⁿr die |1-Quelldateien an
20301 Bitte geben Sie ein Zielverzeichnis an
20302 Das Zielverzeichnis:
20303 existiert nicht. Soll dieses Verzeichnis erstellt werden?
20304 Verzeichnis wechseln
20305 Installieren von
20400 Fehler beim Ermitteln des ben÷tigten Speicherplatzes
20401 Kann Laufwerk nicht lesen
20402 Bitte stellen Sie sicher, da▀ das Laufwerk geschlossen und die Diskette formatiert und fehlerfrei ist
20403 Kann Datei nicht ÷ffnen:
20404 Kann aus Datei nicht lesen:
20405 Kann Datei nicht schreiben:
20406 Bitte stellen Sie sicher, da▀ das Ziellaufwerk genⁿgend freien Speicher hat
20407 Kann Verzeichnis nicht erstellen:
20411 Sind Sie sicher, da▀ Sie die Anwendung beenden m÷chten?
20412 |1-Setup wurde unterbrochen, bevor die Software erfolgreich installiert werden konnte
20413 Sie k÷nnen das |1-Setup spΣter in seiner Ganzheit ausfⁿhren, um die Installation zu vervollstΣndigen
20414 Setup ist noch nicht vollstΣndig durchgefⁿhrt.
20415 Wenn Sie Setup jetzt beenden, ist das Produkt noch nicht vollstΣndig installiert.
20416 Wollen Sie Setup wirklich beenden?
20417 |1-Setup wurde erfolgreich durchgefⁿhrt
20418 |1-Setup wurde nicht erfolgreich durchgefⁿhrt
20419 Fehler beim Ermitteln der Zuteilungseinheit des Laufwerks
20420 ist im Setup-Quellverzeichnis. Bitte geben Sie ein anderes Verzeichnis an
20421 Kann Datei nicht erstellen:
20422 Bitte stellen Sie sicher, da▀ das Ziellaufwerk nicht schreibgeschⁿtzt ist
20423 Bitte legen Sie die folgende Diskette ein:
20424 'Diskette
20425 ' in Laufwerk
20426 Bereich:
20427 Ungⁿltige Zeile in Setup-Informationsdatei!
20428 Angegebenes Verzeichnis:
20429 ist ungⁿltig, unvollstΣndig, oder schreibgeschⁿtzt. Bitte geben Sie einen vollstΣndigen Pfad mit Laufwerkbuchstaben an; zum Beispiel 'C:\APPS'.
20430 Das Verzeichnis existiert nicht!
20431 Ungⁿltiger Verzeichnisname
20432 Zieldatei ist schreibgeschⁿtzt
20433 Zieldatei in Verwendung. Bitte stellen Sie sicher, da▀ alle anderen Anwendungen geschlossen sind
20434 Nicht genⁿgend Speicher im Ziellaufwerk
20435 Zugriffsfehler beim Kopieren der Datei
20436 Fehler beim Freigeben wΣhrend des Kopierens der Datei
20437 Nicht genⁿgend Speicher beim Kopieren der Datei
20438 TemporΣre Datei kann nicht angelegt werden.
20439 Kann bestehende Zieldatei nicht l÷schen
20440 TemporΣre Datei kann nicht umbenannt werden
20441 Kann Quelldatei nicht lesen
20442 Kann Attribute der Zieldatei nicht lesen
20443 Interner Kopierfehler
20444 Datei kann nicht installiert werden
20445 Bitte ⁿberprⁿfen Sie die Verbindung zum Laufwerk
20446 Wenn Sie einen Kopierfehler ⁿbergehen, wird die Datei nicht kopiert. Aus diesem Grund kann die Anwendung fehlerhaft sein. M÷chten Sie diesen Fehler ⁿbergehen?
20447 Das Laufwerk, das in der Umgebungsvariable 'TMP' oder 'TEMP' angegeben ist, ist nicht bereit
20448 Die Zeile 'device=vshare.386' mu▀ m÷glicherweise zum Bereich [386Enh] Ihrer SYSTEM.INI hinzugefⁿgt werden, um fehlerfreie Ausfⁿhrung Ihrer neuen Software zu erm÷glichen
20449 Kann Netzwerkpfad '|1' nicht lesen
20450 Bitte stellen Sie sicher, da▀ der Pfad richtig ist und da▀ Sie die n÷tigen Zugriffsrechte haben
20451 Log-Datei '|1' nicht gefunden. Anwendung wird beendet
20452 Ungⁿltige Befehlszeilenargumente. Anwendung wird beendet
20453 Datei '|1' fⁿr Programm zum Entfernen von Anwendungen nicht gefunden. Anwendung wird beendet
20454 |1 entfernen
20455 Fehler beim Registrieren des Programms zum Entfernen von Anwendungen
20456 Fehler beim Erstellen des Programm-Manager-Symbols fⁿr das Programm zum Entfernen von Anwendungen
20457 Setup wird nun vorhandene Dateien ersetzen. Dies kann m÷glicherweise zu Datenverlust in vorhandenen Anwendungen fⁿhren
20458 Installationen ⁿber bereits vorhandene Installationen ohne diese zuerst zu entfernen, kann zu einer fehlerhaften Installation fⁿhren oder zukⁿnftige Versuche, die Installation zu entfernen, k÷nnen fehlschlagen
20459 M÷chten Sie Setup abbrechen?
20460 Bitte fⁿhren Sie Setup erneut aus, und wΣhlen Sie einen neuen Pfad fⁿr die Anwendungsdateien
20461 Sind Sie sicher, da▀ Sie fortfahren m÷chten?
20462 Fehler beim Aktualisieren der Registrierungsdatenbank von Windows
20463 Gemeinsame Dateien\
20465 Fehler beim Erstellen der Programmgruppe '|1'
20466 Fehler beim Erstellen eines Programmsymbols fⁿr '|1'
20467 Fehler beim Kopieren von '|1' in das Anwendungsverzeichnis
20468 Datei '1' kann nicht registriert werden, da sie nicht gefunden werden konnte
20469 Windows kann die Anwendung '|1' nicht ausfⁿhren. Ihr System hat m÷glicherweise nicht genⁿgend Speicher, oder die Anwendung konnte nicht gefunden werden.
20470 Fehler: 'SETUP.LST' beinhaltet keine Information ⁿber die Registrierung von der Remote-Komponente '|1'. Diese Information sollte unter dem Schlⁿssel '|2' in der SETUP.LST vorhanden sein.
20471 Programm-Manager
20472 Unerwarteter Fehler beim Erstellen von '|1':
20500 Setup kann kein gⁿltiges Standardverzeichnis ermitteln. Bitte geben Sie ein Zielverzeichnis an
20501 Setup ⁿberprⁿft den ben÷tigten Speicherplatz...
20502 Setup erstellt Programmsymbole...
20503 Setup aktualisiert Ihr System...
20504 Name der ausfⁿhrbaren Datei der Anwendung kann nicht ermittelt werden
20505 |1-Setup
20506 Die Datei SETUP.LST ist fehlerhaft oder kann nicht gefunden werden
20507 Unerwarteter Setup-Fehler aufgetreten!
20508 Fehler bei Anpassung von Setup: Fⁿr |1 mu▀ ein Symbol erstellt werden, es wurde aber kein Ordner oder keine Programmgruppe dafⁿr angelegt
20509 Setup-Fehler: 'CommitAction()' oder 'AbortAction()' fehlen
20510 Remote-Automatisierungs-Management
20511 Automatisierungs-Manager
20512 RemAuto-Verbindungs-Manager
20600 Fehler beim Ermitteln des verfⁿgbaren Speichers
20701 Verzeichnis:
20702 &Verzeichnis wechseln
20703 Setup b&eenden
20704 Starten Sie die Installation, indem Sie auf die SchaltflΣche klicken
20705 Abbrechen
20706 Zieldatei:
20707 &Jetzt installieren
20708 &Laufwerk wechseln
20709 Laufwerk
20710 Verfⁿgbarer Speicherplatz
20711 Verwendeter Speicher
20712 Ben÷tigter Speicher
20713 Nicht genⁿgend Speicher auf einem oder mehreren Laufwerken
20714 OK
20715 Lauf&werke:
20716 Ver&zeichnisse:
20717 &Pfad:
20718 Setup kann Systemdateien oder gemeinsame Dateien nicht aktualisieren, wenn Sie bereits verwendet werden. Bevor Sie weitermachen, empfehlen wir Ihnen, alle offenen Anwendungen zu schlie▀en
20900 &Adresse
20901 &Protokoll
20902 &Weiter
20903 Setup b&eenden
20904 Remote-OLE-Server-Konfiguration
20905 Bitte fⁿllen Sie die ben÷tigten Konfigurationsinformationen ⁿber den folgenden Remote-Server aus:
20906 Protokollsequenz |1 (|2) wird nicht unterstⁿtzt oder ist auf diesem System nicht vorhanden
20907 Protokollsequenz '|1' ('|2') ist ungⁿltig
20908 Unerwarteter Fehler beim Ermitteln der Protokollsequenzen, die auf diesem System verfⁿgbar sind
20909 Setup-Fehler: Fehler beim Lesen der Protokolle aus der SETUP.LST
20910 Keines der von dieser Anwendung ben÷tigten Protokolle scheint auf diesem System verfⁿgbar oder installiert zu sein
20911 Um Setup erfolgreich auszufⁿhren, mⁿssen Sie zuerst eine der folgenden Netzwerk-Protokollsequenzen installieren:
20912 Diese Anwendung wird nicht auf die Remote-Komponente '|1' zugreifen k÷nnen, bevor das Protokoll '|2' installiert ist
22000 Datei auf Diskette bereits auf aktuellem Stand
22001 Datei nicht gefunden oder veraltet; neue Datei wurde kopiert
22002 FEHLER:
22003 ACHTUNG:
22004 W─HREND DIESER AKTION:
22005 Fehler beim Schreiben in Log-Datei '|1'
22006 Schwerer Fehler (Setup); Kann Log-Datei fⁿr Installation nicht erstellen
22007 DIESE DATEI BITTE NICHT ─NDERN ODER L╓SCHEN!
22008 Diese Datei enthΣlt Informationen ⁿber die Installation einer Anwendung
22009 Es wird verwendet, um automatisch alle Anwendungskomponenten von Ihrem Computer zu entfernen, wenn Sie es auswΣhlen
22010 Unerwarteter Fehler beim Schreiben oder Erstellen der Log-Datei '|1'. Fehlernummer |2.
22011 Nicht genⁿgend Speicher beim Schreiben oder Erstellen der Log-Datei '|1'
22012 Benutzer hat mit '|1' reagiert
22013 Fehler beim L÷schen der temporΣren Installationsdateien
22014 Setup startet nun das Program zum Entfernen von Anwendungen, um temporΣre Installationsdateien zu entfernen
22100 OK
22101 Abbrechen
22102 Unterbrechen
22103 Wiederholen
22104 ▄bergehen
22105 Ja
22106 Nein
22107 (Unbekannt)
22200 Fehler bei der Registrierung der Datei '|1'
22201 Unerwarteter Fehler bei der Registrierung der Datei '|1'
22202 Kann OLE nicht initialisieren, um Datei '|1' zu registrieren
22203 LoadLibrary() wΣhrend der Registrierung der Datei '|1' fehlgeschlagen
22204 Eingangspunkt fⁿr DllRegisterServer() in '|1' kann nicht gefunden werden
22205 DllRegisterServer() in '|1' hat einen Fehler zurⁿckgegeben
22206 M÷glicherweise ist RPC nicht auf Ihrem System installiert
22207 Wenn dies der Fall ist, mⁿssen Sie Setup unterbrechen, RPC installieren und Setup danach erneut starten.
22208 Datei '|1' wurde nicht kopiert. Diese Datei wird nur unter Windows NT ben÷tigt, nicht unter Windows 95.